33
Level
trOll
Operator’s Manual
0052210 rev. 006
seCtion 4: usinG Win-situ
TIP:
You can turn
off the “Connect
now?” prompt:
Select Preferences menu >
General Settings, deselect
“Prompt for connect at
startup,” click OK. In this
case, connect to the device
by clicking the Connect
button
Win-Situ launches and displays the Data area (“tab”) shown below.
2. Check the COM port. When you launch for the first time, the software
may ask if you want to select a COM port. Do one of the following:
4
Answer Yes to the prompt, then check or change the port in the
Comm Settings dialog, and click OK
to close it, or
4
Answer No to bypass this step.
3. Win-Situ asks if you want to connect to the Level TROLL (the
“device”). If the Level TROLL is connected to your computer as
described in the previous section, answer Yes.
Connect
button
2
3
Data tab
C:\Documents and Settings\ [Login] \My Documents\WinSitu Data
TIP:
For direct
serial connection
the port is usually
COM 1. This is Win-Situ’s
default.
For USB communication,
be sure to select
