45
Level
trOll
Operator’s Manual
0052210 rev. 006
seCtion 5: pressure/LeveL
ConFIGurInG depth and LeveL
This procedure stores the configuration settings in the Level TROLL.
When setting up a log, the same options are presented.
1. While connected to the Level TROLL in software, click the Sensors
tab.
2. Select the level/pressure sensor and click the “Configure” button
. (Not available for a BaroTROLL.)
TIP:
When
you configure
level using the
Sensors tab, the settings
are stored in the Level
TROLL and are available
for use in Modbus,
SDI-12, and analog
communications, as well
as in Win-Situ. Different
configuration may be
selected when setting up
a log.
Sensors tab
“Configure” button
Level/pressure sensor
