![Imperx BOBCAT ICL-B0610C Hardware User Manual Download Page 79](http://html1.mh-extra.com/html/imperx/bobcat-icl-b0610c/bobcat-icl-b0610c_hardware-user-manual_2049008079.webp)
BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 1.0
6421 Congress Ave.
5/4/2010
Boca Raton, FL 33487
+1 (561) 989-0006
79 of 212
samples all pixels for the entire frame, but the user can select only a portion of the
image (AOI) to be used as a sample collecting region. The camera displays the
current luminance, current exposure and current gain. For auto gain control refer to
Automatic Gain Control (AGC) section.
CAUTION NOTE
1. In some bright light conditions a very small exposure values (~ microseconds)
must be used. In such cases the camera response is not linear, i.e. equal exposure
increments do not result in equal brightness increase. In some rare occasions during
such conditions, an image brightness oscillation (image flipping from bright to
dark) could occur. To prevent this, please change the AEC/AGC setting (exposure
speed, luminance level or AOI), or change the lens iris.
2.5.5 Automatic Iris Control (AIC)
The camera has a built in auto iris control feature, which is hardware compatible
with a "Video” auto iris lens. If enabled, the camera provides an analog video
signal (via 12 pin HIROSE connector), which is used by the lens to control the iris.