BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 1.0
6421 Congress Ave.
5/4/2010
Boca Raton, FL 33487
+1 (561) 989-0006
144 of 212
Data (11:0)
:
<value> – V1 column position
Data (31:12)
:
N/A
4.3.11.6 V2 Superimposed Column Position
This register set the position of the vertical column V2 (right) position.
Address
:
0x0144
Data (11:0)
:
<value> – V2 column position
Data (31:12)
:
N/A
4.3.11.7 Superimposed Lines Brightness
This register set the brightness of the superimposed cross and H & V lines.
Address
:
0x0148
Data (11:0)
:
<value> – line brightness
Data (31:12)
:
N/A
4.3.11.8 Center Cross Superimpose Enable
This register enables center cross, superimposed over live image. This shows
the optical image center.
Address
:
0x0134
Data (0)
:
0 – disable cross superimposed
1 – enable cross superimposed
Data (31:1)
:
N/A
4.3.12 Input/output Workspace Registers
4.3.12.1 CC1 Input Polarity
This register sets the polarity (active Low or High) for the CC1 input.
Address
:
0x0570
Data (0)
:
0 – active LOW
1 – active HIGH
Data (31:1)
:
N/A
4.3.12.2 CC1 Input Mapping
This register maps the CC1 camera input to various internal signals.
Address
:
0x0574
Data (2:0)
:
000 – no mapping
001 – computer trigger
010 – reserved
011 – exposure control
