BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 1.0
6421 Congress Ave.
5/4/2010
Boca Raton, FL 33487
+1 (561) 989-0006
178 of 212
desired Y1-point level using the vertical (side) slider (bottom
portion).
7.
Two Point Correction
– two-point image enhancement
operation will be performed. Set the desired X1-point level
using the horizontal (bottom) slider (left portion), and X2-point
– the horizontal (bottom) slider (left portion). Set the desired
Y1-point level using the vertical (side) slider (bottom portion),
and Y2-point – the vertical (side) slider (top portion).
Side Slider
:
Multi purpose dual slider, controls the Y1 and Y2 positions for
single and two-point image enhancement.
Bottom Slider
: Multi purpose dual slider, controls the X1 and X2 positions for
single and two-point image enhancement. Controls the lower and
upper threshold levels for single and dual threshold.
Gray Box:
Multi purpose graphical interface. The user can set the desired X1,
(X1,X2), (X1,Y1) or (X2,Y2) points directly. Grab with the mouse
the yellow dots (dot) and move them in the gray square window
until the desired result is achieved.
5.7.10 Data Output
Data Output window provides full control of the camera digital data output – Figure
5.19.
Figure 5.19 – Data output window
Video Settings
: Sets the data format and camera speed. Refer to Chapter 2 for
more information.
