BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 1.0
6421 Congress Ave.
5/4/2010
Boca Raton, FL 33487
+1 (561) 989-0006
37 of 212
The power and all external input/output signals are supplied to the camera via the
camera power connector shown in Figure 1.5b. The corresponding pin mapping is
shown in Table 1.4a. The connector is a HIROSE type miniature locking receptacle
#HR10A-10R-12P.
Figure 1.5b – Camera power connector
(Viewed from rear)
Pin
Signal
Type
Description
1
12 VDC Return
Ground Return
12 VDC Main Power Return
2
+ 12 VDC
Power - Input
+ 12 VDC Main Power
3
IRIS VCC
Power - Input
12 V Iris Power
4
IRIS Video
Analog Output
Iris Video Output
5
IRIS Return
Ground Return
12 VDC Iris Power Return
6
GP OUT Return Ground Return
General Purpose Outputs Return
7
GP OUT 1
TTL OUT 1
General Purpose Output 1
8
GP IN 1
TTL/LVTTL IN 1
General Purpose Input 1
9
GP IN 2
TTL/LVTTL IN 2
General Purpose Input 2
10
GP IN Return
Ground Return
General Purpose Inputs Return
11
GPIO
LVTTL IN/OUT
Reserved for custom GPIO
12
GP OUT 2
TTL OUT 2
General Purpose Output 2
Table 1.4a – Camera Power Connector Pin Mapping
