BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 1.0
6421 Congress Ave.
5/4/2010
Boca Raton, FL 33487
+1 (561) 989-0006
169 of 212
Pulses per capture
– sets the number of trigger pulses used
during a single acquisition event in “Frame Accumulation”
mode. The user can select from 1 to 65535 discrete pulses.
Exposure Delay:
Sets the delay between the trigger pulse active edge and
beginning of the exposure. The user can set the delay from 0 to
16777215 us.
5.7.4 Pulse Generator
In this window the user can configure the parameters of the Internal Pulse
Generator – Figure 5.13.
Figure 5.13 – Pulse generator window
Granularity:
Sets the granularity for the internal counters. Granularity can be set
to 1x, 10x, 100x or 1000x.
Period
:
Sets the pulse period in microseconds.
Width
:
Sets the pulse width in microseconds.
# of Pulses
:
Sets the number of pulses generated. Two modes are available:
1. Continuous – provides a continuous operation. To stop the
process you have to press the “Stop” button.
2. Fixed # of pulses
– the user can set only a discrete number of
pulses ranging (1 to 65500) to be generated. To stop the process
you have to press the “Stop” button. Otherwise, the process stops
automatically after the last pulse is sent.
