Impediment RS-0800-LVD, User Manual

Page: 22 / 58

RS--0800-LVD User Guide
10
1.3.4.2 Anti-tamper Locks
Anti-tamper locks are fitted in the drive carrier handles ( Figure 1–13 ) and are accessed through the small
cutout in the latch section of the handle.These are provided to disable the normal ‘pinch' latch action of
the carrier handle.
1.3.5 Dummy Carrier Modules
Dummy carrier modules are provided for fitting in all unused drive bays. They are designed as integral
drive module front caps with handles and must be fitted to all unused drive bays to maintain a balanced
airflow.
1.3.6 Blank Modules
Blank modules must be fitted in all vacant bays at the rear of the enclosure to maintain airflow and ensure
correct operation blank modules are available for:
• Cooling module blank
• Power Supply module blank
Warning Operation of the Enclosure with ANY modules missing will disrupt the airflow and the drives will
not receive sufficient cooling. It is ESSENTIAL that all apertures are filled before operating the
unit. Dummy carriers and/or blank modules are available for this purpose.
1.4 Visible Alarms
Modules mounted in the rear of the enclosure are replaceable by trained technician. Power Supply and
cooling modules have an associated status LED on the unit that indicates a problem within the module.
The ESI/Ops Panel shows a consolidated status for all modules.
LEDs show constant green for good or positive indication while amber indicates that there is a fault
present within that module.
Figure 1–15 Anti-tamper Lock