RS--0800-LVD User Guide
26
2.9.2 Procedure
1
Release the carrier handle, by pressing the latch in the handle towards the right and insert the carrier into
the enclosure (
Figure 2–10
).
Important
For a Rack Mounted System: Ensure that the carrier is orientated so that the drive is uppermost
and the handle opens from the left.
2
Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever on the right
of the carrier (
Figure 2–11
)
3
Cam the carrier home - the camming foot on the base of the carrier will engage into a slot in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and
holds the handle closed (
Figure 2–12
).
Note:
Ensure that the handle always opens from left.
Figure 2–10
Installing an Ultra-320 SCSI Drive Carrier Module (1)
Summary of Contents for RS-0800-LVD
