Impediment RS-0800-LVD, User Manual

Page: 30 / 58

RS--0800-LVD User Guide
18
Please contact your supplier to ensure suitable mount rails are available for the rack you are using.
.
2.3.2.1 Parts Check List
• Rack Mounting Rail Kit.
2.3.2.2 Installation Procedure
Please see detail drawings supplied with the rack mounting rail kit for assembly details.
2.3.3 Chassis Installation
2.3.3.1 Parts Check List
• Chassis (complete with Backplane installed but excluding all plug- in modules).
• Rack mount front flange mounting screws (4 off).
2.3.3.2 Procedure
1 Check for damage.
2 Slide the chassis assembly onto the rack rails until the front flanges engage on the rack. Ensure the
chassis is centrally located.
3 If in doubt about correct orientation, the drive bays (at front) should have their black drive connectors
toward the bottom of each bay.
4 If supplied, fit the rear hold down brackets at the rear of the unit (4 screws) do not tighten.
5 Screw the 4 front rack mount screws through the flanges and tighten.
Figure 2–2 Rack Mounting Rail kit