23
The Modeling Light
The Impact VC-500WL Monolight comes with a 250W, 60Hz halogen modeling
lamp bulb. The VC-500WL220V comes with a 250W, 50/60Hz bulb. To remove an
old bulb and install a replacement bulb, use the following instructions:
1.
Ensure the monolight is powered off and unplugged.
2.
Using a cotton glove or soft, dry cloth, carefully
unscrew the modeling light bulb.
3.
With the cotton glove or soft, dry cloth, pick up the
replacement tube.
4.
Insert the back end of the bulb into the modeling
bulb socket and turn it clockwise until secure.
NOTE:
The Digital Monolight has built-in SSC (Soft Start Circuitry) to ensure
longer modeling lamp life. When the modeling lamp is turned on, it will light up at
a minimum brightness and slowly reach full power output. This feature prolongs
the life of the modeling lamp.
Installation and Replacement Guide
