11
The Impact Digital Monolight has two triggering options out of the box – sync
cord and wireless connections. Please reference the following instructions to
connect your camera to the monolight.
Sync Cord
The back of your monolight has a 1/4
″
(6.35 mm) sync input, which is used for
a wired connection between your camera and the flash unit. Use the following
instructions to connect your two devices:
1.
Insert the included sync cable’s 1/4
″
(6.35 mm) end
into the monolight’s sync cable port.
2.
Connect the PC connector end into your camera’s
PC socket. If your camera does not have a PC port,
an adapter will be required.
Wireless (Kit Only)
The Impact Digital Monolight has an integrated 2.4 GHz, 16-channel wireless
receiver. Using the kit-included transmitter, you can wirelessly trigger your flash
unit from up to 328
′
(100 m) away. Line-of-sight is not required for your monolight
to communicate with the transmitter.
For instructions on how to operate your monolight with the transmitter attached
to the hot-shoe of your camera, see Remote Instructions on page 18.
NOTE:
You can attach your own wireless triggering system receiver to the Digital
Monolight using the sync port.
Connecting Your Camera to the Monolight
