20
Testing the Monolight
Press the transmitter’s test button to test-fire the monolight.
Preflash Variation Settings
The Impact Digital Monolight is compatible with nearly all master flash slave
units. Different brands use different numbers of pre-flashes before triggering
other slave units. To facilitate those differences, this studio flash has two
settings that enable the flash to ignore a user-selected timeframe of pre-flashes
before firing. Use these functions when you need to manually control pre-flash,
instead of using the “Slave and Pre-Flash Settings” mode.
NOTE: As different brands of flashes have different numbers and durations of
their pre-flashes, some trial and error may be necessary to obtain your model’s
best settings.
Time Frame
The Time Frame function allows for a variable of 1 to 5 seconds for the studio
flash to ignore master pre-flashes. To use this function, refer to the following
instructions:
1.
Press and hold the slave button for 8 seconds.
2.
Use the or modeling light output buttons to select your required
setting.
