14
Setting the Modeling Light Power Output
The VC-500WL Monolight has a 250 watt, 60Hz user-replaceable modeling light
bulb. The VC-500WL220V Monolight comes with a 220~240V, 50/60 Hz modeling
lamp. The modeling light’s power output is represented by a 1-6 numbered scale,
with ten decimal places between them, on the LCD screen.
This monolight has built-in soft-start circuitry, which ensures longer modeling
lamp life. When the unit is powered on, this unit starts the monolight at a
minimum power output, then raises it incrementally until the desired power
output is reached.
To activate the modeling lamp, press down and release
the output adjustment dial. To increase the modeling
light’s power output, press the modeling light output
button. To decrease the output, press the modeling
light output button. Adjusting the modeling light output
with these buttons will only work when the device is
set to independent mode (see next page).
