21
Setting (t)
1
2
3
4
5
Time (sec)
1
2
3
4
5
NOTE:
The default setting of this function is t2, which means the flash will only
be triggered after 2 seconds of pre-flashes. When using multiple speedlites with
different pre-flash frequencies, this mode will group all the flashes as one before
firing.
Block Time
The Block Time function allows for a variable of 1 to 18 milliseconds for the
studio flash to ignore master pre-flashes. In this mode, your monolight will begin
to record and learn to recognize your device’s pre-flashes. This is to compensate
for the different pre-flash timing between devices. To use this function, refer to
the following instructions:
Press and hold the slave button for 8 seconds.
Press the slave button again.
Use the or modeling light output buttons to select your required setting.
Value (b)
1
2
3
4
5
6
7
8
9
Time (ms)
2
4
6
8
10
12
14
16
18
NOTE:
The default setting on this mode is b5.
