16
The Impact Digital Monolight has seven optical slave/pre-flash modes. You can
toggle between them by repeatedly pushing the slave button until the required
number is indicated by the light on the right side of the panel.
Activate this mode by pressing the slave button once. The
1
icon will appear on
the LCD. Press it again to turn it off. The icon will appear on the LCD.
To adjust the slave/pre-flash settings, press and hold the Slave button for four
seconds. Use the modeling light output buttons to toggle between modes.
C0: Using your master flash, release a test exposure. The monolight will
automatically memorize the amount of preflashes fired.
C1: The monolight will flash when it detects another flash.
C2: The monolight will trigger after one preflash.
C3: The monolight will trigger after two preflashes.
C4: The monolight will trigger after three preflashes.
C5: The monolight will trigger after four preflashes.
C6: The monolight will trigger after five preflashes.
Slave and Pre-Flash Settings
MODEL
FLASH
READY
110V AC
FLASH
2
