30
STV2I ed 11/09
VICTRIX 2 I Export
Technical Documentation
Technical Documentation
System for ducting 80 rigid.
It is a kit that allows ducting Ø 80 mm of existing flues/
chimneys/technical slots
to be used exclusively with a unique
Immergas condensing appliance.
Fit a 90° bend (5) to the appliance exhaust pipe which, using
the necessary vertical extensions (2), must be connected to the
relevant exhaust terminal (1).
Coupling of the various accessories envisions, as well as fitting
with gaskets in EPDM peroxide, also fastening using pipe
clamps (4).
These must be alternated with clips with spacer fins (3), which
allow centring of the exhaust pipe inside the old flue.
The system can be inspected through the hatch (6) positioned
at the mouth of the fitting with the boiler flue evacuation
pipe.
Using a divided kit 80/80 (
1 bend + 1 m in intake and exhaust
)
with intake grid, the maximum length allowed is
30 straight
vertical metres.
System for ducting 80 flexible.
It is a kit that allows ducting Ø 80 mm of existing flues/
chimneys/technical slots
to be used exclusively with a unique
Immergas condensing appliance.
Fit an 87° bend (4) to the appliance exhaust pipe which, using
the necessary vertical extensions (3), must be connected to the
relevant exhaust terminal (1).
Remember to insert a spacer with fins every now and again
(2), which allows the centring of the exhaust pipe inside the
old flue.
The system can be inspected through the hatch (5) positioned
at the mouth of the fitting with the boiler flue evacuation
pipe.
Using a divided kit 80/80 (
1 bend + 1 m in intake and exhaust
+ two variations of the vertical tract
) with intake grid, the ma-
ximum length allowed is
30 straight vertical metres.
1
2
2
3
4
5
6
2
4
1
2
3
4
5
Summary of Contents for VICTRIX 26 2 I
Page 2: ......
