Ikegami IEN-T01 Instruction Manual Download Page 68

Page: 68 / 94

Storing the settings to the PC

The information of network camera/encoder settings can be stored to the PC. This is helpful

when the same or similar settings are made for the other network cameras/encoders or

when the settings must be backed up. Before

upgrading the firmware

, for example,

preferably back up those settings.

Click on “Download Setting Data” in the maintenance menu. The settings data save screen

shows up. Click on .

The confirmation dialog box appears. Click on .

If the “File Download - Security Warning” dialog appears, click on .

Select a folder to store the settings data on and enter a file name. The settings data can be

stored in any folder. The initial file name is “setup-download”. Preferably add a date to the

file name for easy file management.

Click on , and the settings data will be stored with the specified file name.

Summary of Contents for IEN-T01































































































Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands

Ikegami IEN-T01, Instruction Manual

Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands