Ikegami IEN-T01 Instruction Manual Download Page 33

Page: 33 / 94

⑤

ALARM DATA DELIVERY (administrator only)

Alarm images that are put in the network camera/encoder memory are downloaded to

the PC. To record alarm images, the alarm function must be turned on in the

alarm

setting

(page 36).

⑥

RECORD

Click on to record current images onto the PC. To interrupt the recording,

click on .

⑦

SNAPSHOT

Current images are stored onto the PC as still ones. The images are saved in the

BMP

format

Operating the camera connected with the network encoder (ZPC)

When Ikegami’s ZPC series zoom/pan/tilt controller is hooked up with the encoder,

“camera menu” shows up in the menu select area on the

monitor screen

. “ZPC CONTROL”

is added in the drop-down list.

ZPC CONTROL

The ZPC series controller is handled through the “ZPC CONTROL” menu.

①

PAN-TILT

Hold down a specified one of the buttons to pan and tilt the camera.

If the button is released but the camera is still moving, click on

at the center. The

camera stops there.

If the camera is handled almost at the same time from two or more PCs, the later action

is accepted first.

Summary of Contents for IEN-T01































































































Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands

Ikegami IEN-T01, Instruction Manual

Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands