35
Operating the camera connected with the network encoder (ZPC, PCS)
When the ZPC series controller or PCS series camera is hooked up with the encoder, the
mouse can be clicked in the image area to operate the camera.
Move the mouse cursor in the image area, and the cursor changes to . The arrow
comes in 8 directions. While the left mouse button is held down on an arrow, the camera
moves in the arrow’s direction.
Move the mouse cursor to the center, and the cursor changes to
. While the left mouse
button is held down in this position, the camera zooms in an image. With the right mouse
button down, the cursor changes to
and the camera zooms out an image. Release this
button to interrupt the action.
The focus can be adjusted by moving the wheel button of a wheel mouse if used.
Before turning the wheel button to adjust the lens focus, give a click within the image. The
mouse is now to control the image. If the camera is handled almost at the same time from
two or more PCs, the later action is accepted first.
Streaming screen
