Ikegami IEN-T01 Instruction Manual Download Page 51

Page: 51 / 94

Without limit, a new “

Date

Time

” folder is created every 10 minutes under

“Desktop¥Monitoring¥

Streamingtitle

¥Record¥”

Images are recorded in such folders.

If there is no streaming title, a new “

Date

Time

” folder is created under:

“Desktop¥Monitoring¥Record¥”

Images are recorded in this folder.

If an alarm occurs, streamed images are automatically recorded on the PC.

If an alarm occurs during streaming, the alarm images (refer to “

Recording alarm Images in

network camera/encoder’s built-in memory

” (page 37) can be automatically recorded on the

PC.

Alarm images that are recorded in the network camera/encoder’s built-in memory are not

recorded on the PC, but browser-streamed images are recorded. This means that

pre-alarm images (images before alarms) cannot be recorded. Images recorded in the

network camera/encoder are not deleted with “Auto Alarm Record” selected.

Right-click within the streamed image, and the following menu shows up. Select “Auto

Alarm Record”.

Alarm images are stored in

“Desktop¥Monitoring¥

Streamingtitle

¥Auto-Alarm¥

Date

Time

”

If there is no streaming title, the images are stored in

“Desktop¥Monitoring¥Auto-Alarm¥

Date

Time

”

Summary of Contents for IEN-T01































































































Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands

Ikegami IEN-T01, Instruction Manual

Search results

Summary of Contents for IEN-T01

Reviews:

Related manuals for IEN-T01

Brands by name

Popular brands