3. INSTALLATION AND CONNECTION
3 - 17
BS-79 0212 VOL1 (U) (E)
BS-79
3.7
Mounting a Rack-Mount Adapter
1.
Secure the front section of a rack-mount adapter with four screws.
2.
Secure each slide plate with two screws.
Secure the slide plates at both sides.
3.
Connect each slide plate to the corresponding side of the rack-mount adapter with two screws and a plate nut.
Connect both sides of the rack-mount adapter to the corresponding lockings.
19-inch rack
19-inch rack
Locking
Bar nut
Backward right side of a rack mount dedicated
to the BS-79
Front of a rack mount dedicated to the BS-79
M4-6
M5-10＊
M5-10＊
＊
: Longer screws may be required depending on the used rack.
4.
Mount an ADP plate on the base of the BS-79 with four screws.
ADP PLATE
M3-6
M3-6
M3-6
M3-6
