4. SETTINGS
4 - 1
BS-79 0212 VOL1 (U) (E)
BS-79
4.
SETTINGS
4.1
BS Menus
Menus dedicated to the BS-79 are available.
To select and confirm each item, display the corresponding operation menu screen on the monitor.
(1) Menu operation procedure
The menu operation procedure is described below.
In the procedure described below, the RCP-50 is used. If you want to set items using menus displayed on the MCP control panel,
refer to the relevant operation manual.
CONTROL/SELECT knob
LCD touch sensor panel
1.
When the LCD touch sensor panel is in the STATUS display mode, a toolbar is displayed with a touch of the LCD touch
sensor panel.
Only the functions the BS has are displayed.
If the toolbar display is left for about 5 seconds, it automatically turns off.
STATUS
CAP
DIASCOPE
TEST PULSE
CAL
#01
:OFF
:OFF
:OFF
:OFF
GAMMA
FLARE
MATRIX
BK PRS/STR
:0.45
:ON
:ON
:OFF
FILE MENU
INFO
BACK
LIGHT
GAIN
RANGE
CAM
ID
BLACK
VR
2.
Set BARS to "ON", and check BS PM OUT on the monitor.
3.
Press the MENU switch. The main menu dedicated to the BS-79 is displayed on the monitor.
"SCREEN/FILTER" is displayed only when the U/C and D/C modules are installed.
*** BS-79 MENU ***
QUIT
BARS TITLE
SCREEN/FILTER
INFORMATION
OTHERS
--- OPE. GUIDE ---
SELECT : [SEL] KNOB
SELECT : [NEXT] KNOB
ENTER : [ENTER] KEY
Blinking cursor
