IHI NIIGATA MG(L)26HLX, Instruction Manual

Page: 121 / 204

This document is property of NIIGATA POWER SYSTEMS CO., LTD. It must be neither reproduced nor communicated nor published without permission.
S E C T I O N
３
- M A I N T E N A N C E
3.5 MAINTENANCE AND INSPECTION SCHEDULE
３－５－１１
No Maintenance work reference
E -05
E -06
E -07
E -08
E -09
E -10
E -11
E -12
E -13
Fuel injection union
- Check seat and inner surface of drilled hole at extremity.
- Replace O-rings.
Fuel injection pump
- Replace delivery valve.
- Check plunger spring.
Overhaul of flexible coupling (if equipped)
Cleaning of lub. oil sump tank, if necessary
Overhaul governor at specialized shop
Overhaul self cleaning filter, especially self cleaning
device (if equipped)
Centrifuge filter (if equipped)
- Overhaul and cleaning.
- Replace bearing and jet nozzle if necessary.
Overhaul torsional vibration damper (if equipped)
Cooling water and lub. oil cooler
- Overhaul and clean inside of tubes.
- Replace O-rings and gaskets.
Manual of
governor
Manual of
filter
Manual of
filter
Manual of
damper