IHI NIIGATA MG(L)26HLX, Instruction Manual, Page: 129 / 204

This document is property of NIIGATA POWER SYSTEMS CO., LTD. It must be neither reproduced nor communicated nor published without permission.
S E C T I O N
３
- M A I N T E N A N C E
3.5 MAINTENANCE AND INSPECTION SCHEDULE
３－５－１９
year 1 year 2 years 3 years 4 years 5 years
running hour
Maintenance work
×
1000 4 8 12 16 20 24 28 32 36 40
Replace crank-pin bolt of
connecting rod
○
Replace big-end bearing shell
○ ○
Replace expansion joint of
exhaust manifold
○ ○
Inspection torsional vibration damper
○ ○
Overhaul lub. oil pump,
replace bushing and O-ring
○
Replace ball bearing of idle gear shaft
○
Replace intake and exhaust valve
spring
○
Replace main bearing shell
○
Replace thrust collar of crank case
○
Overhaul and inspection safety
valve of cylinder head
○ ○
Remove and inspection cylinder liner
○
Overhaul coolers
○ ○ ○ ○ ○
Replace casing of turbo charger
○
Replace fuel injector and
fuel inlet pipe(union)
○
Overhaul compressor
○ ○ ○ ○ ○
Inspection Air starting
valve , Distributor
○ ○ ○ ○ ○
Inspection Cam metal
○
Reconditioning Crank shaft cam wear
○ ○
Replace Piston pin metal
○
Inspection Valve gear roller
○ ○ ○ ○ ○
Replace Ball bearing and Ball joint
for fuel control linkage
○
Replace fuel cam roller and Bush
○
Inspection fuel feed pump
○
Check the rod big end inner circle
○ ○
Note) It follows the manual of TURBO CARGER for the handling of TURBO CHARGER.