IHI NIIGATA MG(L)26HLX, Instruction Manual, Page: 64 / 204

This document is property of NIIGATA POWER SYSTEMS CO., LTD. It must be neither reproduced nor communicated nor published without permission.
SECTION
２
- OPERATING INSTRUCTION
2.1 STARTING AND WARMUP AFTER A NORMAL
SHUTDOWN
２－１－０４
temperatures of all exhaust ports to insure that all cylinders are firing
normally. (These temperatures should rise 70-100
℃
in about one minute. If an
individual cylinder is significantly cooler than the others, the fuel injector
of that cylinder should be checked for carbon buildup and plugging.
After the engine has warmed up, the speed should be increased gradually up to
the normal operating speed.
As this point, complete engine checks should be made as outline in Section 2.6
(Inspection and Monitoring During Normal Operation).