IHI NIIGATA MG(L)26HLX, Instruction Manual

Page: 136 / 204

This document is property of NIIGATA POWER SYSTEMS CO., LTD. It must be neither reproduced nor communicated nor published without permission.
SECTION
４
- DISASSEMBLY AND REASSEMBLY
4.1CYLINDER HEAD AND VALVE MECHANISM
４－１－０４
Disassembly of the Cylinder Head
Once the cylinder head stud nuts have been removed, the inlet and exhaust
manifolds can be disconnected and the heads remover by using a suitable sling
and eye-bolts. The cylinder liners should be covered to protect against the
entry of dirt.
DANGER
Check the lifting rope and lifting devices. Never stand right under the lifted
heavy parts. Only qualified person will use the crane.