iglu Inuit 6I, Installation Manual

Page: 51 / 73

51
INSTALING INDOOR UNIT
TYPICAL APPLICATION EXAMPLES
The application examples given below are for illustration purposes only.
When the IGLU Air-to-Water Heat Pump system is used in series with another heat source (e.g., gas boiler), ensure that
the return water temperature does not exceed 55 °C.
The unit is only to be used in a closed-water system. Application in an open water circuit can lead to excessive corrosion
of the water piping.
IGLU cannot be responsible for incorrect or unsafe situations in the water system. Make sure that the boiler, radiators,
convectors, solar collectors, UFHs, FCUs, additional pumps, piping, and controls in the water system are in accordance
with relevant local laws and regulations under the installer's responsibility.
IGLU shall not be held liable for any damage resulting from not observing this rule.
IGLU does not provide specific water system components such as Pressure relief valves, Air vent valve, buffer tank, etc.
Installers and end-users shall consider how to install the above-designated components in the overall water system
depending on the installation conditions. If the components are not installed in an appropriate location, the water system
cannot be operated as designed.
*The below examples are for illustration purposes only.
Iglu Inuit 6 WTI / 9 WTI / 12 WTI / 16 WTI: Space h water heating
Iglu Inuit 6 I / 9 I / 12 I / 16 I: Space h water heating