iglu Inuit 6I, Installation Manual

Page: 33 / 73

33
OUTDOOR UNIT INSTALLATION
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed
to an appropriate support (wall or ground).

Fix the outdoor unit with anchor bolts
.
The anchor bolt must be 20 mm or higher from the base surface.
I
GLU® Inuit 6I/ IGLU® Inuit 6WTI
I
GLU® Inuit 9I/ IGLU® Inuit 9WTI
I
GLU® Inuit 12I/ IGLU® Inuit 12WTI
I
GLU® Inuit 16I/ IGLU® Inuit 16WTI

When tightening the anchor bolt, tighten the rubber washer to prevent the outdoor unit bolt connection part
from corroding.

Make a drain outlet around the base for the outdoor unit drainage.

If the outdoor unit is installed on the roof, you must check the ceiling strength and waterproof the unit.