29
UK
11 Parameter setting
During parameter setting the unit remains in the operating mode. It continues
to monitor with the existing parameters until the parameter setting has been
completed.
11.1 Parameter setting in general
3 steps must be taken for each parameter setting:
1
Select the parameter
►
Press [Enter] to get to the menu.
►
Press [
▲
] or [
▼
]
until the required
parameter is displayed.
2
Set the parameter value
►
Press [Enter] to edit the selected
parameter.
►
Press [
▲
] or [
▼
] for min. 1 s.
> After 1 s: Setting value is changed:
incrementally by pressing the button
once or continuously by keeping the
button pressed.
Numerical values are incremented continuously with [
▲
] or decremented with [
▼
].
3
Acknowledgement of the parameter
value
►
Briefly press [Enter].
> The parameter is displayed again.
The new setting value is saved.
Set other parameters
►
Press [
▲
] or [
▼
]
until the required parameter is displayed.
Finish parameter setting
►
Press [
▲
] or [
▼
] several times until the current measured value is displayed or wait for
30 s.
> The unit returns to the process value display.