![background image](http://html1.mh-extra.com/html/ifm/efector160-lr2750/efector160-lr2750_operating-instructions-manual_3913628008.webp)
8
• Tank adjustment enables suppression of undesired interference
(e.g. caused by installations in the tank or when mounted in a connection piece
)
• Display of the level and the switching status via display / LEDs
• IO-Link function
Technical data sheet at www.ifm.com
→ New search → Enter the article
number
6.2.1 Display functions
The unit displays the current level, either in mm, inch or in percent of the final
value of the measuring range. Factory setting: mm. The display unit is defined by
In the operating mode, it can be temporarily switched between mm, inch and
The set unit of measurement and the switching status of the outputs are indicated
6.2.2 Analogue function
The unit provides an analogue signal proportional to the level. The analogue
output (OUT2) can be configured
• [ou2] defines the output function of the analogue output
.
• Analogue start point [ASP2] defines at which measured value the output signal
is 4 mA ([ou2] = [I]) or 20 mA ([ou2] = [InEG])
• Analogue end point [ASP2] defines at which measured value the output signal
is 20 mA ([ou2] = [I]) or 4 mA ([ou2] = [InEG])
Minimum distance between [ASP2] and [AEP2] = 20 % of the active zone.
Curve of the analogue signal (factory setting):