![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1307/ecomat-300-ac1307_basic-device-manual_620663071.webp)
10BSet-up
56BSetting the baud rate of the serial interface
11-3
i
Tip
Set the same value on the PC!
→
page 11-4, chapter "RS-232C"
Install target for the controllere
►
Install the current target for the AS-i controllere, if not done yet:
1.
►
Click on "Start" > "Pro-
grams" > "CoDeSys" > "In-
stallTarget" on the PC
2.
►
Click here to open the instal-
lation file "Target Information
File .TNF"
3.
►
Select the source directory
for the new target (from the
installation CD) and confirm
with [
OK
]
4.
►
Mark the target for the con-
trollere (
→
screen)
►
Press [
Install
] to start the
installation
> Message "The installation
directory does not exist.
Create?"
►
Press [
Yes
] to confirm
►
Press [
Close
] to finish
> That's it. The new target is
installed.