![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1307/ecomat-300-ac1307_basic-device-manual_620663113.webp)
11BProgramming
73BOverview system blocks
12-17
Selection of the operating mode
of an AS-i master
1 = projection mode
0 = protected mode
Setting the projected parame-
ters of an AS-i slave
The output is TRUE if the slave
is activated
The output is TRUE if the slave
is detected
The output is TRUE if the slave
is projected
Stores the variables defined as
VAR_RETAIN in the flash
memory
IMPORTANT:
due to the limited
number of possible write ac-
cess to the flash memory this
command must not be carried
out cyclically!
Further information
→
software description