1BSafety instructions
23BGeneral
2-1
2
Safety instructions
In this chapter you can find general safety instructions, such as:
•
General
rules
•
Safety instructions for mounting and installation
•
When are you allowed to use this device and when not?
2.1
General
No characteristics are warranted with the information, notes and examples pro-
vided in this manual. With the drawings, representations and examples given no
responsibility for the system is assumed and no application-specific particularities
are taken into account.
The manufacturer of the machine/equipment is responsible for the safety of the
machine/equipment.
Danger
Material damage or bodily injury when the notes in this manual are not adhered to!
ifm electronic
assumes no liability for this.
►
The acting person must have read and understood the safety instructions and
the corresponding chapters of this manual before performing any work on or
with this unit.
►
The acting person must be authorised to work on the machine/equipment.
2.2
What previous knowledge is required?
This manual is intended for persons with knowledge of control technology and PLC
programming with IEC 61131-3 as well as the CoDeSys® software.
The manual is intended for persons authorised to mount, connect and set up the
controllere according to the EMC and low voltage directives. The controllers must
be installed and put into operation by a qualified electrician.
In case of malfunctions or uncertainties please contact the manufacturer:
→
back of the manual.
