IET Labs, Inc. RLC Digibridge 1693, User And Service Manual, Page: 75 / 171

51
1693 RLC Digibridge
Operation
3.5.11 Measurement Time Summary
To summarize the relationships of measurement time
to a representative set of the many possible test con-
ditions and operating select ions, refer to Table 3-10
and Figure 3-29.
Figure 3-29: Relationships of Measurement Time
* No entry for delay. When measure mode is CONTINUOUS, settling time is zero.
** No entry for delay. When measure mode is TRIGGERED, settling time is 7, 10, 12 ms/f defaults for measure rate = FAST,
MED, SLOW, respectively; where f = test freq in kHz. Any programmed delay (can be 0 to 99999 ms) would replace the default
settling time.
Table 3-10: Typical Measurement Times vs Frequency and Measurement Rate