IET Labs, Inc. RLC Digibridge 1693, User And Service Manual, Page: 106 / 171

82
1693 RLC Digibridge
Operation
Value Description
HOLD Hold range
1 Hold range 1
2 Hold range 2
3 Hold range 3
4 Hold range 4
AUTo Autorange
Equivalent legacy command:
R0, R1, R2, R3, R4, R5
Equivalent key:
([1] or [2] or [3] or [4]) [=] [SHIFT] [SPECIAL] [1]
:CONFigure:DELay
Syntax:
:CONFigure:DELay <numeric>
Description:
Sets the trigger delay time.
Parameter:
Value Description
<numeric> Delay time real value in ms
Equivalent legacy command:
J<numeric>;
Equivalent key:
(delay in ms) [=] [SHIFT] [SPECIAL] [4]
:CONFigure:ITFactor
Syntax:
:CONFigure:ITFactor <numeric>
Description:
Set the integration-time multiplying factor. Value
<numeric> multiplies MEDIUM and FAST integra-
tion times.
Parameter:
Value Description
<numeric> Integration-Time Multiplying Factor real value
Equivalent legacy command:
I<numeric>;
Equivalent key:
(IT factor in m) [=] [SHIFT] [SPECIAL] [5]
:CONFigure:FREQuency
Syntax:
:CONFigure:FREQuency <numeric>
Description:
Sets the frequency used for measurement signal.
Parameter:
Value Description
<numeric> Frequency real value in kHz
Equivalent legacy command:
F<numeric>;
Equivalent key:
(frequency) [=] [SHIFT] [FREQUENCY]
:CONFigure:VOLTage:CONStant
Syntax:
:CONFigure:VOLTage:CONStant { OFF |ON}
Description:
Set the measurement signal voltage.
Parameter:
Value Description
OFF Set constant voltage off
ON Set constant voltage on
Equivalent legacy command:
Y0, Y1
Equivalent key:
[1] [=] [SHIFT] [CONST V]
:CONFigure:VOLTage:LEVel
Syntax:
:CONFigure:VOLTage:LEVel <numeric>
Description:
Set the measurement signal voltage level.
Parameter:
Value Description
<numeric>
Set measurement voltage level to real value (in
volts)
Equivalent legacy command:
V<numeric>;
Equivalent key:
(voltage) [=] [SHIFT] [VOLTAGE]