IEMCA VIP80E-II, Manual For Use And Maintenance

Page: 82 / 108

EN
6 - USE AND OPERATION VIP80E-II
6 - Pag. 2 / 14
6.1 PRELIMINARY NOTE ON USE AND OPERATION
INFORMATION:
the incidence of injuries caused by the use of machines depends on many
factors that cannot always be prevented and controlled. Some accidents can
depend on some unpreventable environmental factors, others can be especially
due to the operators' behavior. The operators, apart from being authorized and
appropriately informed, at the first use will have to carry out some manoeuvres
to test the controls and the main functions. Exclusively use the machine
according to the instructions provided by the manufacturer and do not tamper
with any devices to obtain different performances. Before use, make sure that
the safety devices are perfectly installed and efficient. Besides satisfying the
above-mentioned requirements, users must enforce and follow all safety
regulations and carefully read the control description and the commissioning.
6.2 CONTROL DESCRIPTION
INFORMATION:
From the keyboard it is possible to start automatically the bar feeder, even
when lathe 'MAN/AUT' signal is in Manual mode.
INFORMATION:
When the Bar feeder is in Automatic mode, the bar feeding is possible only when
the Lathe ‘MAN/AUT’ signal is in Automatic mode.
INFORMATION:
Pressing Manual mode button it is possible to prevent the bar feeder automatic
start by the lathe.