IEMCA VIP80E-II, Manual For Use And Maintenance

Page: 23 / 108

2 - TECHNICAL INFORMATION VIP80E-II
EN
2 - Pag. 7 / 28
- The bar is inserted into the
carriage lathe (F) that then goes
back to its initial position.
- The guide channel (E) is
lowered and at the same time
the "bar drop control device"
unit (D) is lifted. The bar pusher
(A) is lowered and lines up with
the loading axis of the lathe
spindle.
- The bar pusher (A) inserts the
bar into the spindle liner. The
bar ejects the remnant (G)
which is a residual of the
previous machining, and is
positioned for the facing.
The lathe operating cycle starts
with the beginning of the bar facing
phase.
At this point the bar moves forward
in order to be worked until the
piece is completed.
The last phase is repeated until the bar is finished, and a new operating cycle then starts.
F
8070_02_04_1
A
E D
8070_02_17_1
8070_02_05_1
G
A