IEMCA KID 80-IV Touch, Manual For Use And Maintenance

Page: 70 / 92

EN
6 - USE AND OPERATION KID 80 IV
6 - Pag. 10 / 19
6.7 MAGAZINE LOADING
WARNING - CAUTION:
magazine loading must be carried out
using only personal safety garments and,
if necessary, appropriate means. The
person who is authorised to carry out
these operations shall prepare all the
necessary conditions to guarantee his/her
own safety and that of the people directly
involved. In particular, comply with the
workplace health and safety regulations
in force.
For the loading proceed as follows.
- Load the bars on the magazine resting them on
the bulkhead (A).
Note: put the bars down so as not to damage the bar feeder parts.
- For correct loading, adjust the frame (B). Use, if necessary, supplementary extractable racks
(C).
6.8 BAR FEEDER TOOLING
Before starting machining bars with features different from the previous ones, it is necessary to
tool the bar feeder proceeding as follows.
-Replace, if necessary, the bar pusher (see bar and bar pusher diameter table in chapters 2
and 6)
-Replace, if necessary, the lathe reduction noses.
-Adjust the magazine and the bar pushing frame.
-Adjust the loading axis.
-Adjust the bar feeder-lathe guide (OPTIONAL)
-Prepare the bars and load them on the magazine.
-Reset, if necessary, the machining parameters (see "Keyboard instruction manual").