IEMCA KID 80-IV Touch, Manual For Use And Maintenance

Page: 45 / 92

4 - HANDLING AND INSTALLATION KID 80 IV
EN
4 - Pag. 7 / 16
• Fix the upper end of the rod to the block (G) by
means of a self-locking nut (H).
• Install the bar feeder-lathe guide (if provided).
• Install the safety grid (fixed guard).
4.6.4 Alignment and levelling
INFORMATION:
not only alignment and levelling are
fundamental for the correct running of
the bar feeder and for the WARRANTY
VALIDITY, but also they must be carried
out only by a SKILLED STAFF WITH
PRECISE TECHNICAL COMPETENCE.
For the positioning proceed as follows.
• Position the bar feeder near the lathe (see
figure).
• Open the upper guard and manually transfer the
bar pusher (A) until you bring the ends close to
the spindle head (B).