IEMCA KID 80-IV Touch, Manual For Use And Maintenance

Page: 59 / 92

5 - ADJUSTMENTS AND SETTING-UP KID 80 IV
EN
5 - Pag. 5 / 6
5.4 BAR FEEDER-LATHE GUIDE ADJUSTMENT
The adjustment must be carried out according
to the diameter of the bar pusher bearings
and bar to be machined.
- Adjust the guide height, displayed on the
graduated rod (A), in order to respect the
values reported in the table.
Bar feeder-lathe guide height table
Ø B
Bar pusher bearing
diameter(mm)
Ø C
Bar diameter(mm)
Bar guide channel
height
12 5÷12 12(**)
15
10÷15 15
16÷19 16÷19 (*)
21
16÷21 21
22÷80 22÷80 (*)
(*) The height must be equal to the bar diameter (ø C).
(**) Adjust the indicator at the bar guide channel height (example in table) ø12 mm and use it
for the bar diameter range ø C (example in table) 5÷12 mm.
WARNING - CAUTION:
it is forbidden to carry out the adjustment while the bar feeder is in motion.