IEMCA KID 80-IV Touch, Manual For Use And Maintenance

Page: 67 / 92

6 - USE AND OPERATION KID 80 IV
EN
6 - Pag. 7 / 19
18 The bar shows the bar feeder phase during machining, in detail:
- Bar feeder in stand-by
- Bar pusher return
- Zero axis
- Bar loading
- Bar first feeding
- Return after first feeding
- Facing phase
- Open collet
19 Displays the total number of machined pieces.
20 Graphic animation: it shows the feeding carriage and the bar pusher position (raised or
lowered) with respect to the bar feeder axis, in run-time mode.
21 Position from "0": it stands for the feeding carriage position with respect to the S1015 zero
axis sensor; Position from "F": it stands for the feeding carriage position with respect to the
maximum feeding position of the bar feeder.
22 Allows to enter a new menu that includes other keys.
23 Displays the number of machinable pieces.
24 It displays the bar feeder phase during machining procedures.
ID Progr.9 AUTOMATIC MODE 0
Open Collet
Total pieces: Machinable pieces: