57
9 - MAINTENANCE
WARNING!
EVERy TIME THE PRESSURE WASHER IS CLEANED OR MAINTAINED IT MUST FIRST BE STOPPED By
FOLLOWING THE STEPS DESCRIBED IN PARAGRAPH 8.7.
TO GUARANTEE MACHINE SAFETy, yOU ARE ADVISED TO USE ONLy SPARE PARTS AUTHORISED By
THE MANUFACTURER. DO NOT CARRy OUT TEMPORARy OR DANGEROUS REPAIRS.
CAUTION!
DURING OPERATION, THE MACHINE MUST MAINTAIN A NOISE LEVEL THAT COMPLIES WITH LEGI-
SLATION. FURTHERMORE, THERE MUST BE NO WATER LEAKAGE FROM THE MACHINE.
9.1 MAINTENANCE
The pressure washer is a complex machine which contains a high pressure water supply, a heater working
with fuel, an electric motion system, a control system and a heating system that need a big maintenance.
Everything works, most of the time, in awful climatic conditions: bad weather, humidity, ice, hot, hard and
non-stop usage and, not always adequate water, not always strained fuel.
The solution is preventing breakages. How to do it?
Simply replacing the components before they cause breakages.
9.2
ORDINARy MAINTENANCE
CAUTION!
DURING OPERATION, THE MACHINE MUST MAINTAIN A NOISE LEVEL THAT COMPLIES WITH LEGI-
SLATION. FURTHERMORE, THERE MUST BE NO WATER LEAKAGE FROM THE MACHINE.
MAINTENANCE
FREQUENCy
SERVICE
Each time
the machine is used
•
Check that the power cable and the connected plug are always in good
condition for use.
•
Check that the water supply hose, the high pressure hose, the spray gun,
the lance, the nozzle and all the connections are always in good condi-
tion for use.
NOTE: if you experience one or more worn out or damaged parts, do not
use the machine and contact a qualified technician.
Weekly
If there is, check the inlet water filter/s, clean or replace it.
NOTE: The timing of the check may vary depending on the type of water
that feeds the system.
Cop
yrigh
t ©2016 I
dr
obase G
roup
. A
ll righ
ts r
eser
ved
.