HDC-TH200 User Guide/Command Guide
50
8.5.7 [ F46 ] Display period of horizontal dots
You can set display period of horizontal dots.
Setting value
20 to 2900: 20 dots to 2900 dots
Setting range is limited by total number of horizontal dots and horizontal display start position.
Maximum setting value is “total number of horizontal dots - horizontal display start position -1”
【
See: 8.5.3 [ F42 ] The total number of horizontal dots
【
See: 8.5.6 [ F45 ] Horizontal start position
Notes:
・
When you change this setting by using “ + ” and “ - ” buttons the LED blinks. During the LED is blinking,
press
“SET” button and changes are executed.
If you do not operate more than 10 seconds during the LDE blinking, changes are not executed.
・
If there is no analog
signal, it shows “- - -” and cannot change settings.
8.5.8 [ F47 ] Horizontal sync signal width
You can set horizontal sync signal width for analog video input.
Setting value
9 to 360 : 9 dots to 360 dots
Setting range is limited by horizontal display start position.
Maximum setting value is “horizontal display start position -1”
【
See: 8.5.6 [ F45 ] Horizontal start position
Notes:
・
When you change this setting by using “ + ” and “ - ” buttons the LED blinks. During the LED is blinking,
press
“SET” button and changes are executed.
If you do not operate more than 10 seconds during the LDE blinking, changes are not executed.
・
If there is no analog
signal, it shows “- - -” and cannot change settings.
