HDC-TH200 User Guide/Command Guide
23
7
Basic operation
7.1 Menu operations
You can set all input/output settings of video and audio signals from menu operation keys.
Menu operation keys
Select the menu number first and then select the setting number.
If you do not operate for 10 seconds in step 5, you will go back to step 2.
If you do not operate for 60 seconds in each step, the light of the segment display will be turned off.
■
Setting procedure
1
Press the “SET” key.
The segment display lights.
2
Select the menu number using the “+” and
“-” keys.
3
Press the “SET” key to apply the menu
number. The set number is displayed.
4
Select the set number value using the “+”
and “-” keys.
5
Press the “SET” key to apply the setting.
After that, the segment display of Step 2
menu number above is displayed.
If you do not press the “SET” key for 10
seconds, the number is not applied and
the segment display of the step 2 is
displayed. You have to do the same
operation from Step 2 again.
[Fig. 7.1] Menu key operation
Selecting menu
number
Selecting set
number
5
4
1, 3
2
