HDC-TH200 User Guide/Command Guide
34
8.3.2 [ F17 ] Digital input equalizer
You can set digital input equalizer function that correct video attenuation automatically.
Setting value
on : ON (Auto) [Default]
oFF : OFF
Note:
If using a 16 ft. (5 m) or longer cable, we recommend testing the application before installation. To avoid video
interruption at the time of switching, set this function to ON.
8.3.3 [ F07 ] Analog input signal type
You can set video type which is input to analog input connector. If there is no video input on analog input
connector, “- - -” will be displayed.
Setting value
00 : Auto [Default]
01 : Analog RGB
02 : Analog YPbPr
03 : Auto video (Auto recognition between composite and S-Video)
04 : Composite video
05 : S-video
Notes:
・
Usually if the HDC is set to “00” (Auto), HDC recognize input video signal automatically. However, it cannot
be recognized input video image depending on signal condition sometimes, and then please select video
type manually.
・
When you set to “00” (Auto), sometimes auto recognition for S-video is failed. If input signals are
composite video and S-Video
, please set to “03” (Auto video), and if input signal is only S-video, please set
to “05” (S-video)
・
For the mono video
image or bad condition VHS, please set to “03” (Video auto), “04” (Composite video),
or “05” (S-video).
8.3.4 [ F64 ] Color bit for analog video input
Setting value
08 : 8 bit [Default]
10 : 10 bit
12 : 12 bit
Note:
To output Deep Color video image please set output color depth to 10 bit or 12 bit from
”, and use sink device which support Deep Color.
