HDC-TH200 User Guide/Command Guide
14
4.2 Rear panel
⑦
⑨
⑩
⑧
⑥
⑤
[Fig. 4.2] Rear panel drawing
[Table 4.2] Rear panel features
#
Feature
Description
POWER LED
Shows power status of the HDC
ON : Power is supplied to the HDC.
OFF : Power is not supplied to the HDC.
Analog video input
connector
Input connector for analog video signal Following analog signals can
be input.
・
Analog RGB (such as PC)
・
Analog YPbPr (SDTV/HDTV)
・
Composite video (NTSC/PAL)
・
S-Video (NTSC/PAL)
【
See: 6.3.4 Analog video input connector
Audio input connector
Input connector for analog audio input
HDMI input connector
Input connector for HDMI signals
Connector for a source device such as a DVD/Blu-ray player
⑤
HDMI cable fixing hole
Holes for the supplied cable clamps to fix the HDMI cables
【
See: [Fig. 6.2] Securing and removing cable clamp
⑥
HDBaseT output
connector
Output connector for HDBaseT signal
Connecting HDBaseT receivers using twisted pair cable
【
See: 6.3.2 Category cable
【
See: 8.8.8 [ C18 ] HDBaseT output long reach mode
⑦
LAN port
LAN port connector
Connecting network devices
⑧
Connector for
maintenance
Not used. Please do not connect anything; this connector is for
maintenance only.
⑨
DIN connector
Connecting attached AC adapter
【
See: 6.3.3 DIN plug AC adapter with locking mechanism
⑩
Frame ground
Using M3 screw
Connecting ground terminal
