HDC-TH200 User Guide/Command Guide
17
6.3 Cabling
When connecting the HDC to external devices, please observe the following precautions.
・
Read manuals for the external devices.
・
Before connecting cables to the
HDC
or an external device, dissipate static electricity by touching
grounded metal such as equipment racks before handling signal cables. Failure to observe this precaution
may result in ESD (electrostatic discharge) damage.
・
Power all units off before connecting cables.
・
Be sure to fully seat all plugs and connections and dress cables to reduce stress on connectors.
・
Secure HDMI cables using cable clamps to prevent connectors from being accidently pulled out of ports.
Click
Securing HDMI cable using cable clamp
Removing HDMI cable and cable clamp
Pull out while pressing
[Fig. 6.2] Securing and removing cable clamp
6.3.1 Cables
Use the correct HDMI cable or HDMI-DVI conversion cable depending on the system configuration.
