Part 5 - Remote Setup
32
PTZ Camera
Network Camera
Video Management System
NVR (Network Video Recorder)
•
Add
: Select a device in the device list and click
the button to register the device on the network
keyboard. The setup screen appears to allow you to
enter the connection information for the device.
-
ID
: The network keyboard assigns the ID
automatically when the device is registered,
and you can change the ID. The ID is used to
distinguish the device from others for control
with the network keyboard, so each must have a
unique ID.
-
Name
: Set the device name for your reference.
-
Protocol
: Select the protocol of the device (in
case of network cameras only). If the device is not
for Panasonic WV series models, select
Default
.
-
Camera Channels
: Select the number of camera
channels supported by the device.
-
Main Monitors
: Select the number of main
monitor outputs supported by the device. If the
device does not support the secondary monitor,
select
1
. If the device supports it, select
2
.
-
Connection
: Select the device type for
connection to the network keyboard and
configure the settings.
•
RS485
: The RS485 ID of the PTZ camera is used to
distinguish it from other cameras when controlling
it with a network keyboard, so each must have a
unique ID.
•
Ethernet
: Enter the Watch port or Control port set
on the device in Control Port. Enter the Audio port
set on the device in Audio Port. It is possible that
the device shares a Watch port along with an Audio
port. In such case, enter the Watch port for both
Control Port and Audio Port.
•
Edit
: Select a device or monitor and the camera
connected to the device in the list and click the
button for modification.