Part 2 - Installation
18
Video Management System
Registration
You can register the video management system
for control via network connection. The video
management system can be controlled only in
Advanced mode with an aid of the IDIS Discovery
program.
1
Connect the video management system to the
network.
2
Run the IDIS Discovery program and connect the
network keyboard for registration. Refer to IDIS
Discovery Operation Manual on the installation
CD provided with the network keyboard. for more
information about the IDIS Discovery program.
3
Select
Setup > Remote Setup > Network > IP
Address
.
Configure the network connection information.
4
Select
Setup > Remote Setup > Device >
General
.
Select
Advanced
in Setup Type.
5
Select
Setup > Remote Setup > Device >
Setup
.
5-1
Click
Video Management System
and click
Add
for registration.
5-2
Configure the registration information and click
OK
.
•
ID
: The network keyboard assigns the ID
automatically when the video management
system is registered, and you can change
the ID. The ID is used to distinguish the video
management system from others during
control with a network keyboard, so each must
have a unique ID.
•
Connection
: Select
Ethernet
and enter
the IP address, number of ports, user ID,
and password for connection to the video
management system.